DATASHEET
MILO 60 : High-Power Narrow Coverage
Curvilinear Array Loudspeaker
�
�
�
�
�
�
�
�
�
�
Dimensions 54.00" w x 14.47" h x 22.00" d
(1372 mm x 368 mm x 559 mm)
Weight 235 lbs (106.60 kg)
Enclosure Multi-ply hardwood
Finish Black textured
Protective Grille Powder-coated hex-stamped steel
Rigging MRF-MILO rigging frame, custom AlignaLink
connectors and quick release pins
A variation on the popular MILO™ high-
power curvilinear loudspeaker, the MILO 60
high-power narrow coverage curvilinear
array loudspeaker excels where controlled
horizontal coverage is needed. The self-
powered MILO 60 is a compact, lightweight
four-way system that provides 60 degrees
of horizontal coverage, and vertical cover-
age matching the original MILO. The cover-
age pattern is optimized for applications
requiring tight horizontal coverage, such
as at the top in mixed arrays with standard
MILO or M3D line array loudspeaker sys-
tems, or for side fill hangs where keeping
sound off of side walls is important.
arrays with other M Series models are easy
frequency directional control that has won
widespread acclaim for M3D systems. The
M3D-Sub provides a well-controlled cov-
erage pattern to 30 Hz, assuring that very
low-frequency energy does not spill onto
the stage or cause excessive reverberation.
In applications where directional low-fre-
quency control is not a primary consider-
ation, a MILO array can be flown adjacent to
or ground stacked with 700-HP subwoofers.
The 700-HP's power and bandwidth handle
high continuous operating levels and ex-
treme transient information with minimal
distortion in its operating frequency range.
to deploy using the MILO QuickFly® rigging
accessories, such as the MG-3D/M multi-
purpose grid and MCF-MILO caster frame.
Because rigging connections are rigid, the
array tilt is easy to adjust, often eliminating
the need for a pullback strap in flown con-
figurations.
MILO 60 produces a peak output of 140 dB
SPL with exceptionally flat phase and fre-
quency response. Its wide operating fre-
quency range (60 Hz to 18 kHz) is comple-
mented by extended high-frequency head-
room and a dedicated very-high-frequen-
cy section (4.2 kHz to 18 kHz) that renders
delicate transient information with detailed
resolution through its coverage pattern. Its
acoustical characteristics are designed to
facilitate seamless integration when used
with other MILO curvilinear array elements.
Meyer Sound’s RMS™ remote monitoring
system is fitted as standard, providing com-
prehensive monitoring of system perfor-
mance parameters over a Windows-based
network.
The MILO 60 shares the same dimensions
and rigging components as the MILO and
MILO 120 expanded coverage high-power
curvilinear array loudspeakers to facilitate
seamless integration. The flexibility of the
MILO 60 allows it to be configured with
other Meyer Sound loudspeakers in com-
plex systems. MILO 60 arrays and combined
A weather-protected version with a folding
rain hood that safeguards the electronics is
optionally available.
A combined MILO 60/MILO/MILO 120 array
with M3D-Subs affords the precise low-
Controlled horizontal coverage angle of 60
degrees
Seamless integration with other M Series
models
Stadiums, arenas, concert halls and
theatres
Patented REM™ ribbon emulation manifolds
dramatically minimize distortion
QuickFly rigging system simplifies use in
flown or ground-stacked arrays
Touring sound reinforcement
Large-scale events
Exceptional fidelity and peak capability
assure clean, high-impact response
|